Welcome to Linux Support and Sun Help
Search LinuxSupport
Upgrading SpamAssassin?
Please be sure to read the UPGRADE file for important changes that
have been made since previous versions.
Installing or Upgrading SpamAssassin
Using CPAN via CPAN.pm:
	perl -MCPAN -e shell                    [as root]
	o conf prerequisites_policy ask
	install Mail::SpamAssassin
Using Linux:
	Debian unstable: apt-get install spamassassin
	Gentoo: emerge mail-filter/spamassassin
	Fedora: yum install spamassassin
Alternatively download the tarfile, zipfile, and/or build your own RPM
from http://spamassassin.apache.org/.  Building from tar/zip file is
usually as simple as:
	[unzip/untar the archive]
	cd Mail-SpamAssassin-*
	perl Makefile.PL
	[option: add -DSPAMC_SSL to $CFLAGS to build an SSL-enabled spamc]
	make install                            [as root]
Please make sure to read this whole document before installing, especially
the prerequisite information further down.
To install as non-root, see the directions below.
If you are running AFS, you may also need to specify INSTALLSITELIB and
Note that you can upgrade SpamAssassin using these instructions, as long
as you take care to read the caveats in the file UPGRADE.   Upgrading
will not delete your learnt Bayes data or local rule modifications.
If you're using SunOS 4.1.x, see
http://wiki.spamassassin.org/w/BuildingOnSunOS4 for build tips.
Installing SpamAssassin for Personal Use (Not System-Wide)
These steps assume the following, so substitute as necessary:
  - Your UNIX login is "user"
  - Your home directory is /home/user
  - The location of the procmail executable is /usr/bin/procmail
Many more details of this process are at
1. Uncompress and extract the SpamAssassin archive, using "unzip" or
   "tar xvfz", in a temporary directory.
2. change directory into it:
	cd Mail-SpamAssassin-*
3. Make SpamAssassin as normal, but using your home directory as the
	perl Makefile.PL PREFIX=$HOME
	make install
   Please see the file PACKAGING, sections "Changing paths in the Makefile"
   and "Setting further options on the command line" for more informations
   on available command line variables.
4. If you already use procmail, skip to step 6.  If not, ensure procmail
   is installed using "which procmail" or install it from www.procmail.org.
5. Create a .forward file in your home directory containing the below
"|IFS=' ' && exec /usr/bin/procmail -f- || exit 75 #user"
6. Edit or create a .procmailrc file in your home directory containing the
   below lines.  If you already have a .procmailrc file, add the lines to
   the top of your .procmailrc file:
:0fw: spamassassin.lock
| /home/user/bin/spamassassin
   The above line filters all incoming mail through SpamAssassin and tags
   probable spam with a unique header.  If you would prefer to have spam
   blocked and saved to a file called "caughtspam" in your home directory,
   instead of passed through and tagged, append this directly below the above
* ^X-Spam-Status: Yes
Also, see the file procmailrc.example and
7. Now, you should be ready to send some test emails and ensure everything
   works as expected.  First, send yourself a test email that doesn't
   contain anything suspicious.  You should receive it normally, but there
   will be a header containing "X-Spam-Status: No".  If you are only
   tagging your spam, send yourself a copy of the GTUBE test string to
   check to be sure it is marked as spam.  GTUBE is located in the
   sample-spam.txt message distributed with SpamAssassin and also at:
   If your test emails don't get through to you, immediately rename your
   .forward file until you figure out cause of the the problem, so you
   don't lose incoming email.
   Note: one possible cause for this is the use of smrsh on the MTA system;
   see http://wiki.spamassassin.org/w/ProcmailVsSmrsh for details.
8. You can now customize SpamAssassin.  See README for more information.
Most of the modules listed below are available via the Comprehensive Perl
Archive Network (CPAN, see http://www.cpan.org/ for more information).
While each module is different, most can be installed via a few simple
commands such as:
	$ perl -MCPAN -e shell
	cpan> o conf prerequisites_policy ask
	cpan> install Module::Name
	cpan> quit
If there are problems or questions regarding the installation any of the
modules, please see the CPAN and relevant module's documentation for more
information.  We can't provide documentation or installation support for
third party modules.
Additional information about the CPAN module is also available via
"perldoc CPAN".
Most Linux distributions also offer the CPAN modules in their own native
formats (RPMs, Debian packages, etc.), so you should be able to find these
through those mechanisms, too, if you prefer.
Required Perl Interpreter
Perl 5.6.1 or a later version is required.
Required Perl Modules
In addition to the modules associated with Perl, some additional modules
need to be installed or upgraded depending on the version of Perl that you
are running.
You can get an immediate report on which of these modules you may need (or
want) to upgrade, by running "perl build/check_dependencies" from the
SpamAssassin build directory.
The list of required modules that do not ship with Perl and must be
  - Digest::SHA1 (from CPAN)
    The Digest::SHA1 module is used as a cryptographic hash for some
    tests and the Bayes subsystem.
    Debian: apt-get install libdigest-sha1-perl
    Gentoo: emerge dev-perl/Digest-SHA1
  - HTML::Parser >= 3.43 (from CPAN)
    HTML is used for an ever-increasing amount of email so this dependency
    is unavoidable.  Run "perldoc -q html" for additional information.
    Debian: apt-get install libhtml-parser-perl
    Gentoo: emerge dev-perl/HTML-Parser
  - Net::DNS (from CPAN)
    Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
    perform MX checks, used when manually reporting spam to SpamCop,
    and used by sa-update to gather version information.
    You need to make sure the Net::DNS version is sufficiently up-to-date:
      - version 0.34 or higher on Unix systems
      - version 0.46 or higher on Windows systems
  - LWP (aka libwww-perl) (from CPAN)
    This set of modules will include both the LWP::UserAgent and
    HTTP::Date modules, used by sa-update to retrieve update archives.
  - HTTP::Date (from CPAN)
    Used by sa-update to deal with certain Date requests.
  - IO::Zlib (from CPAN)
    Used by sa-update to uncompress update archives.
    Version 1.04 or later is required.
  - Archive::Tar (from CPAN)
    Used by sa-update to expand update archives.
    Version 1.23 or later is required.
Optional Modules
In addition, the following modules will be used for some checks, if
available and the version is high enough.  If they are not available or if
their version is too low, SpamAssassin will still work, just not as
effectively because some of the spam-detection tests will have to be
Note: SpamAssassin will not warn you if these are installed, but the
version is too low for them to be used.
  - MIME::Base64
    This module is highly recommended to increase the speed with which
    Base64 encoded messages/mail parts are decoded.
  - DB_File (from CPAN, included in many distributions)
    Used to store data on-disk, for the Bayes-style logic and
    auto-whitelist.  *Much* more efficient than the other standard Perl
    database packages.  Strongly recommended.
    There seems to be a bug in libdb 4.1.25, which is
    distributed by default on some versions of Linux.  See
    http://wiki.apache.org/spamassassin/DbFileSleepBug for details.
  - Net::SMTP (from CPAN)
    Used when manually reporting spam to SpamCop.
  - Mail::SPF (from CPAN) or Mail::SPF::Query (from CPAN)
    Used to check DNS Sender Policy Framework (SPF) records to fight email
    address forgery and make it easier to identify spams.
    Either of Mail::SPF or Mail::SPF::Query can be used but Mail::SPF is
    preferred as it is the current reference implementation for RFC 4408.
    Net::DNS version 0.58 or higher is required to use Mail::SPF.
    Net::DNS version 0.34 or higher is required to use Mail::SPF::Query.
    If using Mail::SPF note that NetAddr::IP (required by Mail::SPF)
    versions up to and including version 4.006 include a bug that will
    slow down the entire perl interpreter.  NetAddr::IP version 4.007 or
    later fixes this.
  - IP::Country::Fast (from CPAN)
    Used by the RelayCountry plugin (not enabled by default) to determine
    the domain country codes of each relay in the path of an email.
  - Net::Ident (from CPAN)
    If you plan to use the --auth-ident option to spamd, you will need
    to install this module.
  - IO::Socket::INET6 (from CPAN)
    This is required if the first nameserver listed in your IP
    configuration or /etc/resolv.conf file is available only via an IPv6
  - IO::Socket::SSL (from CPAN)
    If you wish to use SSL encryption to communicate between spamc and
    spamd (the --ssl option to spamd), you need to install this
    module. (You will need the OpenSSL libraries and use the
    ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
    compatibile spamc.)
  - Compress::Zlib (from CPAN)
    If you wish to use the optional zlib compression for communication
    between spamc and spamd (the -z option to spamc), useful for
    long-distance use of spamc over the internet, you need to install
    this module.
  - Time::HiRes (from CPAN)
    If this module is installed, the processing times are logged/reported
    more precisely.
  - Mail::DKIM (from CPAN)
    If this module is installed, and you enable the DKIM plugin,
    SpamAssassin will perform DKIM lookups when a DKIM-Signature header is
    present in the message headers.  If Mail::DKIM version 0.20 or later
    is installed, this will also perform Domain Key lookups on
    DomainKey-Signature headers, without requiring the Mail::DomainKeys
    Note that the Mail::DKIM module in turn requres the OpenSSL libraries.
  - Mail::DomainKeys (from CPAN)
    If this module is installed, and you enable the DomainKeys plugin,
    SpamAssassin will perform Domain Key lookups when Domain Key
    information is present in the message headers.
    Note that Mail::DKIM version 0.20 or later will perform Domain Key
    lookups, so this may be redundant.
    Note that the Mail::DomainKeys module in turn requres the OpenSSL
    libraries and the CPAN module Crypt::OpenSSL::Bignum.
  - DBI *and* DBD driver/modules for your database (from CPAN)
    If you intend to use SpamAssassin with an SQL database backend for
    user configuration data, Bayes storage, or other storage, you will need
    to have these installed; both the basic DBI module and the driver for
    your database.
  - Encode::Detect (from CPAN)
    If you plan to use the normalize_charset config setting to detect
    charsets and convert them into Unicode, you will need to install
    this module.
  - Apache::Test (from CPAN)
    If you plan to run the Apache2 version of spamd in the
    "spamd-apache2" directory, you will need to install this
  - Apache 2 and mod_perl
    If you plan to run the Apache2 version of spamd in the "spamd-apache2"
    directory, you will need to ensure these are installed.
    Ubuntu: sudo apt-get install apache2 libapache2-mod-perl2
  - Razor2
    If you plan to use Vipul's Razor, note that versions up to and
    including version 2.82 include a bug that will slow down the entire
    perl interpreter.  Version 2.83 or later fixes this.
    If you do not plan to use this plugin, be sure to comment out
    its loadplugin line in "/etc/mail/spamassassin/v310.pre".
What Next?
Take a look at the USAGE document for more information on how to use
The SpamAssassin Wiki <http://wiki.spamassassin.org/> contains
information on custom plugins, extensions, and other optional modules
included with SpamAssassin.
(end of INSTALL)
// vim:tw=74:
Valid HTML 4.01! Valid CSS!